125001195 - 1092A10 CRANKSHAFT SERVICES PULLEY - R.R.

Removing ( Refitting ) Position the vehicle on a lift.Proceed with the removal    Op. 4450B08 RIGHT REAR WHEEL R R.Proceed with the removal    Op. 7055B64 LH OR RH REFLECTOR(ONE) ON REAR BUMPERS - R R.Proceed with the removal    Op. 1092G10 SINGLE ENGINE BELT R R.1. Fit the crankshaft pulley counter-torque tool.
DescriptionCode
1Counter-torque for crankshaft1.870.646.000
2. Loosen the nut for the crankshaft pulley.
Remove the crankshaft pulley counter-torque tool.1. Completely undo the nut (1a) and remove the crankshaft pulley (1b).
Refitting ( Removing ) Position the pulley on the crankshaft and secure it without tightening the nut.1. Fit the crankshaft pulley counter-torque tool.
DescriptionCode
1Counter-torque for crankshaft1.870.646.000
2. Tighten the nut fixing the crankshaft pulley to the recommended torque.
FasteningComponentØ  Value(daNm)
2Left nutCRANKSHAFT PULLEYM28(Crankshaft side) 22.8 - 25.2
Remove the crankshaft pulley counter-torque tool.
Proceed with the refitting    Op. 1092G10 SINGLE ENGINE BELT R R.Proceed with the refitting    Op. 7055B64 LH OR RH REFLECTOR(ONE) ON REAR BUMPERS - R R.Proceed with the refitting    Op. 4450B08 RIGHT REAR WHEEL R R.Remove the vehicle from the lift.