125001216 - 1810A24 CLUTCH - R + R WITH GEARBOX REMOVED

Removing ( Refitting ) 1. Fit the flywheel lock.
DescriptionCode
1Counter-torque1.860.846.001
2. Undo the bolts (2a) and remove the clutch tray (2b) and the thrust bearing (2c).3. Remove the clutch plate.
1. Working at the bench, remove the thrust bearing (1a) from the clutch tray using the tool (1b).
DescriptionCode
1bExtractor1.821.215.000
Refitting ( Removing ) 1. Place the clutch plate (1a) and the clutch tray (1b) in their housing using the tool (1c) for centering.
DescriptionCode
1cTool for centering clutch1.870.081.000
2. Tighten the bolts fixing the clutch tray to the recommended torque.
FasteningComponentØ  Value(daNm)
2BoltCLUTCH ASSEMBLYM8(Engine flywheel side) 2.5 - 3.1
3. Remove the flywheel lock.
DescriptionCode
3Counter-torque1.860.846.001
.
Fit the thrust bearing together with the manual gearbox with differential.    Op. 2110A10 MANUAL GEARBOX AND DIFFERENTIAL - R + R.