125001221 - 1820A26 THRUST BEARING LINKAGE - R + R WITH GEARBOX REMOVED
Removing
(
Refitting
)
1. Remove the circlip (1a) and the lever (1b).2. Remove the outer non-slip bush.3. Remove the thrust control linkage.4. Remove the inner non-slip bush.
Refitting
(
Removing
)
Place the inner non-slip bush back in its housing.Place the thrust control linkage back in its housing.Place the outer non-slip bush back in its housing.Place the lever back in its housing and secure it using the circlip.
Removing
(
Refitting
)
1. Remove the circlip (1a) and the lever (1b).2. Remove the outer non-slip bush.3. Remove the thrust control linkage.4. Remove the inner non-slip bush.