125001229 - 1820B58 CLUTCH HYDRAULIC CIRCUIT VIBRATION DAMPER - R+R

Removing ( Refitting ) Proceed with removal    Op. 5530B10 BATTERY - R+RProceed with removalRemove the protective cap on the master cylinder bleed valve.    Op. 5530B52 BATTERY DRIP TRAY/SUPPORT - R.R.Connect the collection system (pipe and reservoir) to the bleed valve on the clutch operating cylinder.Operate the clutch pedal until the brake/clutch reservoir is completely empty.1. Remove the split pin (1a) and disconnect the pipe between the vibration damper and the operating cyliner (1b), vibration damper side.2. Remove the split pin (2a) and disconnect the clutch hydraulic circuit vibration damper (2b), clutch master cylinder side.3. Remove the clutch hydraulic circuit vibration damper (3a) with the pipes incorporated, after having released it from the band (3b). Refitting ( Removing ) Place the hydraulic clutch circuit vibration damper back in its housing and secure it using the band.Connect the clutch hydraulic circuit vibration damper, clutch master cylinder side and secure it using the split pin.Connect the pipe from the vibration damper to the operating cylinder, vibration damper side and secure it using the split pin.Bleed the air and top up the level in the hydraulic clutch system    Op. 0010T67 HYDRAULIC CLUTCH SYSTEM BLEED AIR.Bleed the air from the hydraulic braking system    Op. 0010T65 HYDRAULIC BRAKE SYSTEM BLEED AIR.Proceed with refitting    Op. 5530B52 BATTERY DRIP TRAY/SUPPORT - R.R..Proceed with refitting    Op. 5530B10 BATTERY - R+R.