2110B32 MANUAL GEARBOX (5 SPEED) WITH DIFFERENTIAL - DISMANTLE AND REBUILD - WASH AND CHECK PARTS - REPLACE SYNCHRONISERS, INNER CONTROLS, GEARS, SHAFTS AND BEARINGS - Alfa - GT - eLearn

125001242 - 2110B32 MANUAL GEARBOX (5 SPEED) WITH DIFFERENTIAL - DISMANTLE AND REBUILD - WASH AND CHECK PARTS - REPLACE SYNCHRONISERS, INNER CONTROLS, GEARS, SHAFTS AND BEARINGS

) Op. 2110B20 MANUAL GEARBOX (5 SPEED) WITH DIFFERENTIAL - DISMANTLE AND REBUILD - WASH AND CHECK PARTS - REPLACE SYNCHRONISERS AND INTERNAL CONTROLS IF NECESSARY1. Remove the differential support bearing outer races using the tool.

	Name	Country
1	Extractor	1.821.003.000

1. Remove the guide pin for fitting reverse gear (1a) after having removed the outer staking (1b).

1. Move the layshaft front bearing inner race as far away as necessary, using a special chisel.2. Remove the layshaft front bearing inner race (2a) using the tool (2b).

	Name	Country
2b	Extractor	1.821.117.000

1. Move the layshaft front bearing inner race as far away as necessary, using a special chisel.2. Remove the mainshaft front bearing inner race (2a) using the tool (2b).

	Name	Country
2b	Extractor	1.821.117.000

Refitting ( Removing

) 1. Fit the mainshaft front bearing inner race (1a), using a hydraulic press, the half plates (1b) and the fitting tool (1c).

	Name	Country
1b	Half-plates	1.820.022.000

Fit the inner race for the layshaft front bearing using a hydraulic press and a flat-based fitting tool.Fit the guide pin for fitting reverse gear and fix through external staking.1. Fitting differential support bearing outer races using the tool.

	Name	Country
1	Fitting tool	1.821.028.000

Op. 2110B20 MANUAL GEARBOX (5 SPEED) WITH DIFFERENTIAL - DISMANTLE AND REBUILD - WASH AND CHECK PARTS - REPLACE SYNCHRONISERS AND INTERNAL CONTROLS IF NECESSARY