125001247 - 2110C22 GEAR INPUT SHAFT SEALS - R R

It is not possible to remove/refit the manual gearbox with differential in the car. The power unit has to be removed/refitted and then the manual gearbox with differential has to be separated from the engine at the bench.

Removing ( Refitting ) Drain the air conditioner coolant circuit    Op. 5040A10 EXPANSION/CONNECTION PIPE - R R.Proceed with removal    Op. 1048A48 THROTTLE HEATER SLEEVE - R RProceed with removalProceed with removal    Op. 5530B10 BATTERY - R+RProceed with removalProceed with removal    Op. 5530B52 BATTERY DRIP TRAY/SUPPORT - R.R.Proceed with removalProceed with removal    Op. 1048A10 AIR CLEANER FILTERING ELEMENT - REPLACEProceed with removalProceed with removal    Op. 4450B12 FRONT OR REAR WHEELS (TWO) - R+RProceed with the removal(Right and left sides).    Op. 7055B54 UNDER-ENGINE GUARD - R RProceed with removalProceed with removal- 7210A15 R.R. HEADLAMP HOUSING/FRONT WING CROSSMEMBER     Op. 7055B64 LH OR RH REFLECTOR(ONE) ON REAR BUMPERS - R RProceed with removalProceed with removal    Op. 7055B42 LH OR RH REFLECTOR(ONE) ON REAR BUMPERS - R RProceed with removalProceed with removal    Op. 7210E10 R.R. FRONT BUMPERProceed with removalProceed with removal    Op. 5540B76 FRONT LIGHT CLUSTER WITH FOGLAMP ONE LH OR RH R R WITH INTERFERING PARTS REMOVEDProceed with removal    Op. 7025A34 BONNET LID LOCK (ONE) - R+R OR REPAIR    Op. 1088B20 ENGINE COOLING RADIATOR - R + R    Op. 1076B82 LEFT EXHASUST PIPE BETWEEN CATALYTIC PRECONVERTER AND CONVERTER R R    Op. 1008A44 REAR RIGID MOUNT - R R    Op. 1004B10 POWER UNIT WITH MANUAL GEARBOX - R + R    Op. 1004D10 POWER UNIT (MANUAL GEARBOX), REMOVED, REMOVE AND RE-BUILD    Op. 2110A10 MANUAL GEARBOX AND DIFFERENTIAL - R + R    Op. 2110C20 SEALS FOR GEAR INPUT SHAFT - REPLACE WITH GEARBOX REMOVED Refitting ( Removing ) Proceed with refitting    Op. 2110C20 SEALS FOR GEAR INPUT SHAFT - REPLACE WITH GEARBOX REMOVED.Proceed with refitting    Op. 2110A10 MANUAL GEARBOX AND DIFFERENTIAL - R + R.Proceed with refitting    Op. 1004D10 POWER UNIT (MANUAL GEARBOX), REMOVED, REMOVE AND RE-BUILD.Proceed with refitting    Op. 1004B10 POWER UNIT WITH MANUAL GEARBOX - R + R.Proceed with refitting    Op. 1008A44 REAR RIGID MOUNT - R R.Proceed with refitting    Op. 1076B82 LEFT EXHASUST PIPE BETWEEN CATALYTIC PRECONVERTER AND CONVERTER R R.Proceed with refitting    Op. 1088B20 ENGINE COOLING RADIATOR - R + R.Proceed with refitting- 7210A15 R.R. HEADLAMP HOUSING/FRONT WING CROSSMEMBER .Proceed with refitting    Op. 7025A34 BONNET LID LOCK (ONE) - R+R OR REPAIR.Proceed with the refitting    Op. 5540B76 FRONT LIGHT CLUSTER WITH FOGLAMP ONE LH OR RH R R WITH INTERFERING PARTS REMOVED(Right and left sides).Proceed with refitting    Op. 7210E10 R.R. FRONT BUMPER.Proceed with refitting    Op. 7055B42 LH OR RH REFLECTOR(ONE) ON REAR BUMPERS - R R.Proceed with refitting    Op. 7055B64 LH OR RH REFLECTOR(ONE) ON REAR BUMPERS - R R.Proceed with refitting    Op. 4450B12 FRONT OR REAR WHEELS (TWO) - R+R.Proceed with refitting    Op. 1048A10 AIR CLEANER FILTERING ELEMENT - REPLACE.Proceed with refitting    Op. 5530B52 BATTERY DRIP TRAY/SUPPORT - R.R..Proceed with refitting    Op. 5530B10 BATTERY - R+R.Proceed with refitting    Op. 1048A48 THROTTLE HEATER SLEEVE - R R.Refill the engine oil lubrication system    Op. 0010T11 ENGINE OIL CHECK LEVEL AND TOP UP.Refill the engine cooling system with coolant    Op. 0010T20 COOLANT CHECK DENSITY AND TOP UP IF NECESSARY.Bleed the air and top up the level in the hydraulic clutch system    Op. 0010T67 HYDRAULIC CLUTCH SYSTEM BLEED AIR.Fill the air conditioner coolant circuit    Op. 5040A10 EXPANSION/CONNECTION PIPE - R R.Proceed with refitting    Op. 7055B54 UNDER-ENGINE GUARD - R R.