2110C50 GEAR SELECTION AND ENGAGEMENT UNIT - R R - Alfa - GT - eLearn

125001250 - 2110C50 GEAR SELECTION AND ENGAGEMENT UNIT - R R

) Proceed with removal Op. 5530B10 BATTERY - R+RProceed with removal1. Disconnect the electrical connection from the reversing lights switch. Op. 5530B52 BATTERY DRIP TRAY/SUPPORT - R.R.

	Name	Connector
1	Reversing lights switch	See I20 REVERSING LIGHTS SWITCH

1. Disconnect the gear selector and engagement cables2. Undo the fastenings (2a) and move the mounting brackets (2b) complete with gear selector and engagement cables aside.

1. Undo the bolts (1a) and remove the gear selector and engagement assembly (1b).

Refitting ( Removing

) Place the gear selector and engagement unit back in its housing and secure it using the bolts.Place the mounting bracket, complete with gear selector and engagement cables, back in its housing.1. Position the gear lever (1a) in contact with the reverse inhibition wall (1b).

1. Loosen the adjustment nut on the gear selector and engagement assembly.2. Position the spacer tool under the gear engagment lever.

	Name	Country
2	Spacer	1.870.974.000

3. Connect the gear selector cable.Tighten the adjustment nut on the gear selector and engagement assembly.

Position the gear lever in Reverse position and remove the tool located under the gear engagement lever.

	Name	Country
-	Spacer	1.870.974.000

Place the gear lever in ''neutral''.Connect the gear engagement cable.Connect the electrical connection to the reversing lights switch.Proceed with refitting Op. 5530B52 BATTERY DRIP TRAY/SUPPORT - R.R..Proceed with refitting Op. 5530B10 BATTERY - R+R.