125001259 - 2110D52 L/H FLANGE ON DIFFERENTIAL - R + R WITH DRIVE SHAFT REMOVED

Removing ( Refitting ) Undo the drain plugs and drain the transmission fluid completely.
Collect the transmission fluid in a suitable container.
Remove the left differential internal driveshaft using the tools.
DescriptionCode
-Mallet1.821.161.000
DescriptionCode
-Flange1.820.229.000
Undo the bolts and remove the left flange on the differential. Refitting ( Removing ) Position the left flange in its housing in the differential and secure it tightening the bolts to the recommended torque.
FasteningComponentØ  Value(daNm)
-----
Place the differential internal driveshaft in its housing.Clean the gearbox-differential fluid drain plugs and tighten them to the recommended torque.
FasteningComponentØ  Value(daNm)
-Drain plugGEAR CASING PADSM18(Differential side) 1.6 - 2.6
FasteningComponentØ  Value(daNm)
-Drain plugGEAR CASING PADSM22(Manual gearbox/differential union mount side) 3.0 ÷4.8
Refit the manual gearbox with differential    Op. 0010T40 MANUAL GEARBOX OIL CHECK LEVEL AND TOP UP IF NECESSARY.