125001265 - 2110D74 DIFFERENTIAL L/H INNER DRIVE SHAFT - R + R

Removing ( Refitting ) Position the vehicle on a lift.Proceed with the removal    Op. 4450B02 LEFT FRONT WHEEL R R.Proceed with the removal    Op. 4410A80 DAMPER LOWER FORK - R R(Left side).Proceed with the removal    Op. 2710A10 DRIVE SHAFT WITH JOINTS (ONE), L/H OR R/H - R + R(Left side).Undo the drain plugs and completely drain the manual gearbox and differential fluid.

Collect the transmission fluid in a suitable container.

Remove the left differential internal driveshaft using the tools.

	Description	Code
-	Mallet	1.821.161.000

	Description	Code
-	Flange	1.820.229.000

Refitting ( Removing ) Place the differential internal driveshaft in its housing.Clean the gearbox-differential fluid drain plugs and tighten them to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
-	Drain plug	GEAR CASING PADS	M18	(Differential side) 1.6 - 2.6

	Fastening	Component	Ø	Value(daNm)
-	Drain plug	GEAR CASING PADS	M22	(Manual gearbox/differential union mount side) 3.0 ÷4.8

Proceed with the refitting    Op. 2710A10 DRIVE SHAFT WITH JOINTS (ONE), L/H OR R/H - R + R(Left side).Proceed with the refitting    Op. 4410A80 DAMPER LOWER FORK - R R(Left side).Proceed with the refitting    Op. 4450B02 LEFT FRONT WHEEL R R.Refit the manual gearbox with differential    Op. 0010T40 MANUAL GEARBOX OIL CHECK LEVEL AND TOP UP IF NECESSARY.Remove the vehicle from the lift.