125001299 - 2710A10 DRIVE SHAFT WITH JOINTS (ONE), L/H OR R/H - R + R

Removing ( Refitting ) Position the vehicle on a lift.PROCEED AS FOLLOWS FOR THE RIGHT DRIVESHAFTProceed with the removal    Op. 4450B04 RIGHT FRONT WHEEL R R.Proceed with the removal    Op. 7055B66 ENGINE COMPARTMENT DUST SHIELD PROTECTION IN RIGHT FRONT WHEEL ARCH - R.R..Proceed with the removal    Op. 7055B91 RIGHT FRONT WHEEL ARCH LINER - R.R..PROCEED AS FOLLOWS FOR THE LEFT DRIVESHAFTProceed with the removal    Op. 4450B02 LEFT FRONT WHEEL R R.Proceed with the removal    Op. 7055B65 ENGINGE BAY DUSTGUARD PROTECTION IN LEFT FRONT WHEEL ARCH R R.Proceed with the removal    Op. 7055B90 LEFT FRONT WHEEL ARCH LINER - R.R..PROCEED AS FOLLOWS FOR BOTH DRIVESHAFTS1. Remove the two bevels and undo the nut fixing the front wheel hub to the driveshaft.

Use a 36 mm USAG spanner modified as shown in the diagram to loosen the above nut.

Proceed with the removal    Op. 4410A80 DAMPER LOWER FORK - R R.1. Undo the bolts (1a) and remove the driveshaft complete with joints (1b). Refitting ( Removing ) 1. Place the driveshaft complete with joints (1a) in its housing and fasten it tightening the bolts (1b) to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
1b	Bolt	DRIVESHAFT	M10	(Differential internal driveshaft side) 5.8 - 7.0

	Fastening	Component	Ø	Value(daNm)
1b	Bolt	DRIVESHAFT	M10	(Intermediate driveshaft side) 5.8 - 7.0

Proceed with the refitting    Op. 4410A80 DAMPER LOWER FORK - R R.1. Tighten the nut (1a) fixing the front wheel hub to the driveshaft to the recommended torque using the angular tightening tool (1b).

	Fastening	Component	Ø	Value(daNm)
1a	Nut	FRONT HUBS COMPLETE WITH BEARING	M24	(Driveshaft side) 6.7 - 7.4 + 41° ± 2?

	Description	Code
1b	Torque wrench	1.860.942.000

1. Make two bevels on the nut collar as illustrated in the diagram. PROCEED AS FOLLOWS FOR THE LEFT DRIVESHAFTProceed with the refitting    Op. 7055B90 LEFT FRONT WHEEL ARCH LINER - R.R..Proceed with the refitting    Op. 7055B65 ENGINGE BAY DUSTGUARD PROTECTION IN LEFT FRONT WHEEL ARCH R R.Proceed with the refitting    Op. 4450B02 LEFT FRONT WHEEL R R.PROCEED AS FOLLOWS FOR THE RIGHT DRIVESHAFTProceed with the refitting    Op. 7055B91 RIGHT FRONT WHEEL ARCH LINER - R.R..Proceed with the refitting    Op. 7055B66 ENGINE COMPARTMENT DUST SHIELD PROTECTION IN RIGHT FRONT WHEEL ARCH - R.R..Proceed with the refitting    Op. 4450B04 RIGHT FRONT WHEEL R R.Position the vehicle on a lift.