3310B48 REAR BRAKE DISC - R R - Alfa - GT - eLearn

125001326 - 3310B48 REAR BRAKE DISC - R R

) Position the vehicle on the rampProceed with removal Op. 4450B11 TYRE INFLATION VALVE CAP - REPLACE1. Undo the nut (1a) of the bolt and move the rear suspension front trailing arm (1b) as much as necessary.2. Undo the nut on the top bolt securing the shock absorber to the hub vertical link.

This operation enables you to access the bottom bolt securing the brake caliper bracket.

3. Undo the bolts (3a), move the bracket (3b) complete with rear brake caliper (3c) after releasing the flexible pipe from the attachment on the shock absorber, then secure it appropriately.

This operation enables you to access the top bolt securing the brake caliper bracket.

1. Undo the bolt (1a) and remove the rear brake disc (1b).

Refitting ( Removing

) 1. Refit the rear brake disc (1a) in its seating and fix it tightening the bolt (1b) to the specified torque.

	Fastening	Component	Ø	Value(daNm)
1b	Pin	FRONT BRAKE DISC.	M8	(Wheel hub side) 1.0 ÷ 1.4

1. Refit the bracket (1a) in its seating complete with rear brake caliper (1b) and tighten the bolts (1c) to the specified torque.

	Fastening	Component	Ø	Value(daNm)
1c	Bolt	REAR BRAKE CALIPER BRACKET	M10	(Rear wheel hub stub axle side.) 4.5 ÷ 5.5

Fix the brake caliper flexible pipe to the shock absorber.2. Tighten the nut on the top bolt securing the shock absorber to the hub vertical link to the specified torque.

	Fastening	Component	Ø	Value(daNm)
2	Bolt	REAR DAMPER	M12	(Rear wheel hub stub axle side.) 11.1 ÷ 13.5

3. Refit the rear suspension rear trailing arm (3a) in its seating and fix it tightening the nut (3b) to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
3b	Bolt	REAR SUSPENSION FRONT WISHBONES	M12	(Rear wheel hub stub axle side.) 11.1 ÷ 13.5

Proceed with refitting Op. 4450B11 TYRE INFLATION VALVE CAP - REPLACE.Remove the car from the ramps.