3330C30 BRAKE FLUID RESERVOIR - R + R AND WASH INSIDE - Alfa - GT - eLearn

125001347 - 3330C30 BRAKE FLUID RESERVOIR - R + R AND WASH INSIDE

) Position the vehicle on a lift.Make sure that the ignition key is in the OFF position, then disconnect the battery terminal (-).

	Description	Connector
-	Battery	See A1B BATTERY ( BATTERY NEGATIVE )

Proceed with the removal Op. 4450B02 LEFT FRONT WHEEL R R.Remove the protective cap from the bleed valve on the brake caliper.Connect the recovery device (pipe and reservoir) to the brake caliper bleed valve.Operate the brake pedal until the brake/clutch reservoir is drained.1. Disconnect the electrical connection from the brake fluid minimum level warning light switch.

	Description	Connector
1	Brake fluid level sensor (switch)	See K25 BRAKE FLUID LEVEL SENSOR (SWITCH) ( FRONT )

2. Undo the nuts (2a) and lift up the brake fluid reservoir (2b) as necessary.3. Disconnect the pipes from the brake fluid reservoir to the master cylinder, reservoir side.4. Disconnect the flexible pipe from the reservoir to the clutch master cylinder, reservoir side.Remove the brake fluid reservoir.

Refitting ( Removing

) Wash the inside of the brake fluid reservoir.Connect the flexible pipe from the reservoir to the clutch master cylinder, reservoir side.Connect the pipes from the brake fluid reservoir to the master cylinder, reservoir side.Place the brake fluid reservoir back in its housing and secure it using the nuts.Connect the electrical connection to the brake-clutch fluid minimum level warning light switch.Top up the brake-clutch fluid level Op. 0010T64 BRAKE AND OR CLUTCH FLUID CHECK LEVEL AND TOP UP AS NECESSARY.Bleed the air from the hydraulic braking system Op. 3330A14 FRONT OR REAR HYDRAULIC BRAKE SYSTEM - BLEED.Proceed with the refitting Op. 4450B02 LEFT FRONT WHEEL R R.Connect the negative battery terminal (-).Remove the vehicle from the lift.