3330D02 BRAKE SERVO/BRAKE PUMP ASSEMBLY - R R - Alfa - GT - eLearn

125001351 - 3330D02 BRAKE SERVO/BRAKE PUMP ASSEMBLY - R R

) Position the vehicle on a lift.Proceed with the removal Op. 5530B10 BATTERY - R+R.Proceed with the removal Op. 5530B52 BATTERY DRIP TRAY/SUPPORT - R.R..Proceed with the removal Op. 4450B02 LEFT FRONT WHEEL R R.Proceed with the removal Op. 3330C30 BRAKE FLUID RESERVOIR - R + R AND WASH INSIDE.Proceed with the removal Op. 3340A12 ABS HYDRAULIC AND ELECTRONIC CONTROL UNIT.Proceed with the removal Op. 3340A13 ABS CENTRAL MOUNT - R R.1. Disconnect the single-acting valve from the brake servo.2. Release the rigid pipe from the A.B.S. hydraulic control unit to the right front brake (2a) from the fastening band (2b).

Working in the passenger compartment, release the buttons and move the trim.1. Work on the fastening clips (1a) and release the brake pump (1b) from the pedal.

Take care not to damage the fastening clips.

1. Undo the nuts fixing the brake servo/brake pump assembly to the pedals mounting.

1. Working in the engine compartment, remove the brake servo/brake pump assembly.

Refitting ( Removing

) Working in the engine compartment, place the brake servo/brake pump assembly in position.1. Working in the passenger compartment, tighten the nuts fixing the brake servo/brake pump assembly to the pedals mounting.

	Fastening	Component	Ø	Value(daNm)
1	Nut	BRAKE SERVO	M8	1.8 ÷ 2.6

Connect the brake pump to the pedal.Fit the trim in position and secure it using the buttons.Fasten the rigid pipe from the A.B.S. hydraulic control unit to the right front brake to the band.Connect the single-acting valve to the brake servo.Proceed with the refitting Op. 3340A13 ABS CENTRAL MOUNT - R R.Proceed with the refitting Op. 3340A12 ABS HYDRAULIC AND ELECTRONIC CONTROL UNIT.Proceed with the refitting Op. 3330C30 BRAKE FLUID RESERVOIR - R + R AND WASH INSIDE.Proceed with the refitting Op. 5530B52 BATTERY DRIP TRAY/SUPPORT - R.R..Proceed with the refitting Op. 5530B10 BATTERY - R+R.Top up the brake-clutch fluid level Op. 0010T64 BRAKE AND OR CLUTCH FLUID CHECK LEVEL AND TOP UP AS NECESSARY.Bleed the air from the hydraulic braking system Op. 0010T65 HYDRAULIC BRAKE SYSTEM BLEED AIR.Proceed with the refitting Op. 4450B02 LEFT FRONT WHEEL R R.Remove the vehicle from the lift.