3380A38 LINK/CABLE CONNECTING HANDBRAKE LEVER TO CABLE - R+R - Alfa - GT - eLearn

125001392 - 3380A38 LINK/CABLE CONNECTING HANDBRAKE LEVER TO CABLE - R+R

) Position the vehicle on the rampEnsure that the ignition key is in the OFF position, then disconnect the negative battery terminal (-).

	Name	Connector
-	Battery	See A1B BATTERY ( BATTERY NEGATIVE )

Proceed with removal Op. 3380A10 HANDBRAKE LEVER - R+R1. Remove the retainer (1a) and disconnect the handbrake cables (1b).2. Undo the bolts (2a) and remove the rod/cable connecting the handbrake lever to the cables (2b).

Refitting ( Removing

) Place the rod/cable connecting the handbrake lever to the cable and secure it using the bolts.Connect the handbrake cables and secure them using the retainer.Proceed with refitting Op. 3380A10 HANDBRAKE LEVER - R+R.Adjust the travel of the handbrake lever Op. 3380A04 HANDBRAKE - CHECK TRAVEL.Connect the negative (-) battery terminalRemove the car from the ramps.