125001575 - 5050D13 HEADLAMP WASHER SYSTEM TYPES AND FITTINGS - R R

Refitting ( Removing ) Check that the pipes are not damaged.Connect the pipe to the headlamp washer pump and secure it with the retaining band.Position the coolant reservoir and secure it using the bolts.Connect the retaining band.Fit the pipe on the front bumper and secure it with the retaining bands.Connect the pipe quick-release fittings to the headlamp washer jets.    Op. 7210E10 R.R. FRONT BUMPER    Op. 7055B42 LH OR RH REFLECTOR(ONE) ON REAR BUMPERS - R R(right and left)    Op. 7055B64 LH OR RH REFLECTOR(ONE) ON REAR BUMPERS - R R(right and left)    Op. 7055B54 UNDER-ENGINE GUARD - R RCheck that the headlamp washer system is working properly.     Op. 7055B54 UNDER-ENGINE GUARD - R R    Op. 7055B64 LH OR RH REFLECTOR(ONE) ON REAR BUMPERS - R R(right and left)    Op. 7055B42 LH OR RH REFLECTOR(ONE) ON REAR BUMPERS - R R(right and left)    Op. 7210E10 R.R. FRONT BUMPER1. Disconnect the pipe quick-release fittings from the headlamp washer jets.2. Open the bands.3. Remove the pipe 1. Undo the bolts fixing the coolant reservoir.2. Disconnect the retaining band.3. Move the coolant reservoir. 1. Loosen the band on the coolant supply pipe to the headlamp washer.2. Disconnect and recover the pipe.