125001606 - 5510C16 LEFT HAND CYLINDER HEAD IGNITION COIL - R+R

Removing ( Refitting ) Ensure that the ignition key is in the OFF position, then disconnect the negative battery terminal (-).

	Name	Connector
-	Battery	See A1B BATTERY ( BATTERY NEGATIVE )

Proceed with removal    Op. 1016A42 LEFT HAND CYLINDER HEAD IGNITION COIL COVER - R+R1. Disconnect the electrical connections from the left cylinder head ignition coils.2. Undo the bolts (2a) and remove the ignition coils (2b) from the left cylinder head.

	Name	Connector
1	Ignition coil	See A30 IGNITION ''COIL

Refitting ( Removing ) Place the ignition coils back in their housings on the left cylinder head and secure them by tightening the bolts to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
-	Bolt	IGNITION COIL/REEL	M6	(Tappet cover side) 0.8 ÷ 1.0

Connect the electrical connections to the left cylinder head ignition coils.Proceed with removal    Op. 1016A42 LEFT HAND CYLINDER HEAD IGNITION COIL COVER - R+R.Connect the negative (-) battery terminal