125001610 - 5510C46 FLYWHEEL SIDE KNOCK SENSOR - R+R

Removing ( Refitting ) Position the vehicle on the rampProceed with removal    Op. 4450B02 LEFT FRONT WHEEL R RProceed with removalProceed with removal    Op. 7055B65 ENGINGE BAY DUSTGUARD PROTECTION IN LEFT FRONT WHEEL ARCH R RProceed with removalProceed with removal    Op. 7055B54 UNDER-ENGINE GUARD - R RProceed with removalProceed with removal    Op. 5530B10 BATTERY - R+R1. Undo the bolt (1a) and remove the flywheel side detonation sensor (1b).    Op. 5530B52 BATTERY DRIP TRAY/SUPPORT - R.R.    Op. 1008C10 POWER UNIT UPPER REACTION LINK R R    Op. 1088D24 RIGID PIPE FOR COOLANT INLET TO WATER PUMP - R + R
Refitting ( Removing ) Place the flywheel side detonation sensor back in its housing and fix it tightening the bolt to the recommended torque.

FasteningComponentØValue(daNm)
-BoltFLYWHEEL SIDE KNOCK SENSORM8(Engine crankcase side) 2.3 ÷ 2.8
Proceed with refitting    Op. 1088D24 RIGID PIPE FOR COOLANT INLET TO WATER PUMP - R + R.Proceed with refitting    Op. 1008C10 POWER UNIT UPPER REACTION LINK R R.Proceed with refitting    Op. 5530B52 BATTERY DRIP TRAY/SUPPORT - R.R..Proceed with refitting    Op. 5530B10 BATTERY - R+R.Proceed with refitting    Op. 7055B65 ENGINGE BAY DUSTGUARD PROTECTION IN LEFT FRONT WHEEL ARCH R R.Proceed with refitting    Op. 4450B02 LEFT FRONT WHEEL R R.Refill the engine cooling system with coolant    Op. 0010T20 COOLANT CHECK DENSITY AND TOP UP IF NECESSARY.Proceed with refitting    Op. 7055B54 UNDER-ENGINE GUARD - R R.Remove the car from the ramps.