125001613 - 5510D10 SPARK PLUGS - R+R

Removing ( Refitting ) Make sure that the ignition key is in the OFF position, then disconnect the battery terminal (-).

	Description	Connector
-	Battery	See A1B BATTERY ( BATTERY NEGATIVE )

Proceed with the removal    Op. 1016A42 LEFT HAND CYLINDER HEAD IGNITION COIL COVER - R+R.Proceed with the removal    Op. 5510C16 LEFT HAND CYLINDER HEAD IGNITION COIL - R+R.Proceed with the removal    Op. 1072B50 SLEEVES CONNECTING AIR CAPACITY BOX TO INLET MANIFOLD IS - R+R.Proceed with the removal    Op. 5510C18 RIGHT HAND CYLINDER HEAD IGNITION COIL - R+R.Blow air into the spark plug housings and remove any impurities or traces of dirt.1. With the engine cold, unscrew the spark plugs and remove them.

Seal the spark plug housings to prevent any foreign bodies from entering.

Check the state of the spark plugs and replace them, if necessary.

Using different spark plugs from the recommended ones can cause damage to the engine and alter the exhaust emission levels.

Refitting ( Removing ) Fit the spark plugs and tighten them to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
-	-	SPARK PLUGS	M14	(Cylinder head side) 2.4 - 3.0

Proceed with the refitting    Op. 5510C18 RIGHT HAND CYLINDER HEAD IGNITION COIL - R+R.Proceed with the refitting    Op. 1072B50 SLEEVES CONNECTING AIR CAPACITY BOX TO INLET MANIFOLD IS - R+R.Proceed with the refitting    Op. 5510C16 LEFT HAND CYLINDER HEAD IGNITION COIL - R+R.Proceed with the refitting    Op. 1016A42 LEFT HAND CYLINDER HEAD IGNITION COIL COVER - R+R.Connect the negative battery terminal (-).