125001673 - 5540C46 SENSOR FOR CORRECTING/ALIGNING GAS DISCHARGE LIGHTING UNITS ON REAR SUSPENSION - R R
Removing
(
Refitting
)
Place the vehicle on a lift and raise.1. Working under the left rear suspension, undo the nut fixing the connecting rod.2. Disconnect the link from the sensor lever.3. Undo the bolts fixing the sensor.4. Move the sensor (4a) and disconnect the electrical connection (4b), then keep the sensor.| Name | Connector | |
|---|---|---|
| 4b | Headlamp aglinment rear potentiometer | See K2 HEADLAMP AGLINMENT REAR POTENTIOMETER ( CONNECTORS ) |
Refitting
(
Removing
)
Check that the sensor is not damaged.Connect the sensor electrical connection.Position the sensor and secure it using the bolt.Connect the link to the sensor lever and tighten the nut.Remove the vehicle from the lift.Zero the headlamp position using an Examiner or another tester.