125001824 - 7025A10 BONNET LID - SQUARE

Lift the bonnet lid.1. If necessary, adjust the buffer blocks.2. If necessary, adjust the lock position.    Op. 7025A34 BONNET LID LOCK (ONE) - R+R OR REPAIR. 1. If necessary, undo the hinge bolts and adjust the bonnet position. The arrows indicate possible movements.Tighten the hinge bolts.

	Fastening	Component	Ø	Value(daNm)
-	Bolt	LONGITUDINAL SUPPORT ON ROOF	M6	0.85

If the adjustments described above are insufficient, adjust bonnet lid hinge position as described below.    Op. 7055B64 LH OR RH REFLECTOR(ONE) ON REAR BUMPERS - R R(right and left).    Op. 7055B42 LH OR RH REFLECTOR(ONE) ON REAR BUMPERS - R R(right and left).1. Remove the soundproofing.2. Slacken the nuts (2a) securing the hinges (2b) and adjust the position until the bonnet is aligned. The arrows (2c) indicate the possible movements.3. Tighten the nuts.

	Fastening	Component	Ø	Value(daNm)
3	Nut	BONNET LID HINGES	M8	2.4

Touch up the paintwork in the hinge area.Fit the soundproofing in position.    Op. 7055B42 LH OR RH REFLECTOR(ONE) ON REAR BUMPERS - R R(right and left).    Op. 7055B64 LH OR RH REFLECTOR(ONE) ON REAR BUMPERS - R R(right and left).