125001828 - 7025A26 BONNET LID OPENING CONTROL - REPAIR

Removing ( Refitting )     Op. 7025A34 BONNET LID LOCK (ONE) - R+R OR REPAIR    Op. 7025A24 BOOT LID OPENING LEVER - R+RWorking in the passenger compartment, connect a sensor to the inner end of the opening cable (this operation is necessary to facilitate the subsequent refitting of the opening cable inside the passenger compartment).1. Working in the engine compartment, open the cable duct. 1. Remove the opening cable, pulling it from the engine compartment. Refitting ( Removing ) Check that the opening control is not damaged.Reposition the control cable, inserting it from the engine compartment side and using the sensor positioned during the removal.Remove the sensor.Close the cable duct.    Op. 7025A24 BOOT LID OPENING LEVER - R+R    Op. 7025A34 BONNET LID LOCK (ONE) - R+R OR REPAIR