7040A31 FLAP ASSEMBLY - R R - Alfa - GT - eLearn

125001857 - 7040A31 FLAP ASSEMBLY - R R

) 1. Open the dashboard compartment flap.2. Release the ends of the end of travel rods.3. Undo the bolts fixing the compartment.

1. Move the compartment slightly.2. Release the courtesy light from its housing.3. Disconnect the electrical connections (3a, 3b, 3c).

	Name	Connector
3a	Glove compartment light	See G30 GLOVE COMPARTMENT LIGHT ( FACIA )

	Name	Connector
3b	Glove compartment light	See I15A GLOVE COMPARTMENT LIGHT ( FACIA )

	Name	Connector
3c	Glove compartment light	See I15B GLOVE COMPARTMENT LIGHT ( FACIA )

4. Recover the compartment.4. If necessary, release the switch from its housing.

Refitting ( Removing

) Check that the compartment is not damaged.If removed, refit the switch in its housing.Connect the electrical connections .Fit the courtesy light in its housing.Position the compartment.Tighten the compartment fixing bolts.Engage the ends of the end of travel rods, then close the flap checking that it is working properly.