125001887 - 7040L10 CABIN FLOOR CARPET - R R

Removing ( Refitting )     Op. 7045A10 L/H OR R/H FRONT SEAT (ONE) - R+R(right and left)    Op. 7050A22 REAR SEAT CUSHION - R+R(right and left)- 2127E10 hydraulic speed selection system control unit - r r (if fitted)    Op. 7040A65 PASSENGER COMPARTMENT BOX LOCK , ONE , R R(right and left)    Op. 3380A44 HANDBRAKE/LINKAGE PROTECTION - R+R    Op. 7040L28 TUNNEL SWITCH PANEL - R R    Op. 7040L20 TUNNEL TRIM - R R    Op. 7040L40 REAR COMPARTMENT SCUFF STRIP - R R(right and left)    Op. 5010C44 AIR DIFFUSER TO REAR SEAT - R+R(right and left)    Op. 7040A37 FUSE BOX COVER - R R    Op. 7040A95 REINFORCEMENT BRACKET ONE LH OR RH BETWEEN FACIA SUPPORT BEAM AND BODY R R    Op. 5010B45 DUCT FROM CLIMATE CONTROL SYSTEM - R R(right and left)1. From both sides of the car, remove the covers (1a) and undo the bolts (1b), then move the seat belt mounting brackets (1c). 1. Undo the bolt.2. Remove the rear seat cushion pin retainer.3. Release the carpet retaining buttons using the special tool.

	Name	Country
3	Scraper blade	1.823.015.000

4. Disconnect the electrical connection.

	Name	Connector
4	Handbrake switch	See I40 HANDBRAKE SWITCH

1. Undo the bolts securing the bracket for the air duct to the rear seats.2. Remove the bracket with duct. 1. Disconnect the electrical connections (1a, 1b).

	Name	Connector
1a	Air bag control unit	See M60A AIR BAG CONTROL UNIT ( FACIA )

	Name	Connector
1b	Air Bag earth	See C50A AIR BAG EARTH ( FACIA )

1. From both sides of the car, undo the carpet retainer.2. Unscrew the accelerator pedal end of travel. 1. Remove the carpet. Refitting ( Removing ) Check that the carpet is undamaged.Position the carpet.Tighten the accelerator pedal end of travel.From both sides of the car, screw on the carpet retainer.Connect the Air Bag control unit electrical connections.

	Fastening	Component	Ø	Value(daNm)
-	Bolt	AIR BAG SYSTEM EARTH	M8	2.4

Refit the bracket with air duct for the rear seats and tighten its bolts.Connect the handbrake electrical connection.Engage the carpet retaining buttons.Position the rear seat cushion pin retainer and secure it with the bolt.From both sides of the car, position the seat belt mounting brackets and secure them with the bolts, then fit the covers.

	Fastening	Component	Ø	Value(daNm)
-	Bolt	FRONT SEAT BELT FIXED END	M7/16''''	4.0

    Op. 5010B45 DUCT FROM CLIMATE CONTROL SYSTEM - R R(right and left)    Op. 7040A95 REINFORCEMENT BRACKET ONE LH OR RH BETWEEN FACIA SUPPORT BEAM AND BODY R R    Op. 7040A37 FUSE BOX COVER - R R    Op. 5010C44 AIR DIFFUSER TO REAR SEAT - R+R(right and left)    Op. 7040L40 REAR COMPARTMENT SCUFF STRIP - R R(right and left)    Op. 7040L20 TUNNEL TRIM - R R    Op. 7040L28 TUNNEL SWITCH PANEL - R R    Op. 3380A44 HANDBRAKE/LINKAGE PROTECTION - R+R    Op. 7040A65 PASSENGER COMPARTMENT BOX LOCK , ONE , R R(right and left)- 2127E10 hydraulic speed selection system control unit - r r (if fitted)    Op. 7050A22 REAR SEAT CUSHION - R+R(right and left)    Op. 7045A10 L/H OR R/H FRONT SEAT (ONE) - R+R(right and left)Check the operation of the system using the Examiner or another tester.