125002601 - 1056B62 L/H AND R/H FUEL PIPE ASSEMBLY - WITH INJECTORS - R + R

Removing ( Refitting ) Ensure that the ignition key is in the OFF position, then disconnect the negative battery terminal (-).

	Name	Connector
-	Battery	See A1B BATTERY ( BATTERY NEGATIVE )

Proceed with removal    Op. 1072B42 LEFT HAND OR RIGHT HAND INLET MANIFOLD (ONE) - R+RDischarge the fuel system pressure with the tool connected to the bleed valves on the fuel pipe.1. Disconnect the quick-release connector for the front fuel supply pipe, fuel pipe side.

	Name	Country
-	Rapid connector	1.870.684.000

2. Disconnect the electrical connections from the injectors.3. Undo the bolts (3a) and remove the fuel pipe (3b) complete with injectors (3c).

	Name	Connector
2	Injector	See N70 INJECTOR

Avoid working with the engine hot under all circumstances;

Precautions to be taken for the rapid connector between the pipe connecting the right and left fuel manifolds.

Never use tools such as pliers, screwdrivers, etc. under any circumstances;If it is released, rotate the rapid connector cover before acting on the release buttons;Check its condition (deformation/breakage of retaining lugs, release buttons) before reconnecting it;After re-engageing the rapid connector, check that it is correctly attached by pulling it;At the end of fitting, check that there are no fuel leaks by starting up the engine again;If there is damage to the rapid connector, replace the complete right pipe. Refitting ( Removing ) Place the fuel pipe, complete with injectors, back in its housing and fix it using the bolts.Connect the electrical connections to the injectors.Connect the quick-release connector for the front fuel supply pipe, fuel pipe side.Proceed with refitting    Op. 1072B42 LEFT HAND OR RIGHT HAND INLET MANIFOLD (ONE) - R+R.Connect the negative (-) battery terminal