125002603 - 1056B67 R/H FUEL MANIFOLD PIPE, WITH INJECTORS - R + R

Removing ( Refitting ) Ensure that the ignition key is in the OFF position, then disconnect the negative battery terminal (-).

	Name	Connector
-	Battery	See A1B BATTERY ( BATTERY NEGATIVE )

Proceed with removal    Op. 1072B42 LEFT HAND OR RIGHT HAND INLET MANIFOLD (ONE) - R+RDischarge the fuel system pressure with the tool connected to the bleed valve on the right fuel pipe.1. Disconnect the electrical connections from the right injectors.

	Name	Country
-	Rapid connector	1.870.684.000

2. Disconnect the rapid connector connecting the right fuel manifold pipe to the left one.

	Name	Connector
1	Injector	See N70 INJECTOR

Avoid working with the engine hot under all circumstances;

Precautions to be taken for the rapid connector between the pipe connecting the right and left fuel manifolds.

Never use tools such as pliers, screwdrivers, etc. under any circumstances;If it is released, rotate the rapid connector cover before acting on the release buttons;Check its condition (deformation/breakage of retaining lugs, release buttons) before reconnecting it;After re-engageing the rapid connector, check that it is correctly attached by pulling it;At the end of fitting, check that there are no fuel leaks by starting up the engine again;If there is damage to the rapid connector, replace the complete right pipe.3. Undo the bolts (3a) and remove the right fuel manifold pipe (3b) complete with injectors (3c). Refitting ( Removing ) Place the right fuel manifold pipe, complete with injectors, back in its housing and fix it using the bolts.Connect the rapid connector connecting the right fuel manifold pipe to the left one.Connect the electrical connections to the injectors.Proceed with refitting    Op. 1072B42 LEFT HAND OR RIGHT HAND INLET MANIFOLD (ONE) - R+R.Connect the negative (-) battery terminal