1056B82 INJECTION/IGNITION SYSTEM E.C.U. (ONE) - R + R - Alfa - GT - eLearn

125002608 - 1056B82 INJECTION/IGNITION SYSTEM E.C.U. (ONE) - R + R

) Ensure that the ignition key is in the OFF position, then disconnect the negative battery terminal (-).

	Name	Connector
-	Battery	See A1B BATTERY ( BATTERY NEGATIVE )

1. Disconnect the electrical connections (1a) and (1b) from the injection/ignition system control unit.

	Name	Connector
1a	Engine management control unit	See M10A ENGINE MANAGEMENT CONTROL UNIT ( FRONT )

	Name	Connector
1b	Engine management control unit	See M10B ENGINE MANAGEMENT CONTROL UNIT ( CONNECTORS )

1. Undo nuts (1a) and remove injection/ignition control unit (1b).

Refitting ( Removing

) Place the injection/ignition system control unit back in its housing and fix it using the bolts.Connect the electrical connections to the fuel injection/ignition control unit.Connect the negative (-) battery terminal

If a new injection/ignition system control unit is being fitted, carry out the self-learning procedure for it Op. 1056B81 RUN ELECTRONIC IGNITION/INJECTION CONTROL UNIT (SINGLE) SELF-LEARNING PROCEDURE.