125000843 - 0010T62 POWER STEERING FLUID CHECK LEVEL AND TOP UP IF NECESSARY

• Position the vehicle on a lift.

• Remove the protective cap from the bleed valve on one brake caliper.
• Connect the recovery device (pipe and reservoir) to the bleed valve on the brake calliper.
• Open the bleed valve on the brake caliper.

• Operate the brake pedal until all the fluid emerges.
• Repeat the operations described above for the remaining brake calipers.

• Open the protective cover.
• Connect the recovery device (pipe and reservoir) to the clutch hydraulic actuator fitting.
• Raise the retaining clip (3a) until the first click is heard and remove pipe (3b) by a sufficient amount to uncover the bleed hole.

• Operate the clutch pedal until the circuit is completely empty.

• Connect the tool to the brake/clutch fluid reservoir.

	Description	Code
1	Brake - clutch bleed equipment	1.806.097.001

2. Slowly open the device reservoir cock and refill the brake/clutch systems with the recommended fluid.

	Type	Component	Description	Qty.
2	Fluid [I]	BRAKE-CLUTCH HYDRAULIC SYSTEM	TUTELA CAR TOP 4 FOR ALFA ROMEO	0.52

• Wait for all the air in the hydraulic brake-clutch system to escape.
• Close the bleed valves on the brake callipers and fit protective plugs.
• Fit the pipe fully home in its seat on the hydraulic clutch actuator and secure with the retaining clip, then close the protective cover.
• Remove the fluid recovery devices.
• Remove the equipment.

	Description	Code
-	Brake - clutch bleed equipment	1.806.097.001

• Remove the vehicle from the lift.
• Check that the clutch disengages properly and that the gears engage and that the brake system is efficient.