1008B30 GEARBOX SIDE MOUNT FLEXIBLE BLOCK - REPLACE - Alfa - GT - eLearn

125000882 - 1008B30 GEARBOX SIDE MOUNT FLEXIBLE BLOCK - REPLACE

) Position the vehicle on a lift.Proceed with the removal Op. 4450B02 LEFT FRONT WHEEL R RProceed with the removal Op. 7055B65 ENGINGE BAY DUSTGUARD PROTECTION IN LEFT FRONT WHEEL ARCH R RPosition a hydraulic jack beneath the gearbox.1. Unscrew the bolt securing the power unit rigid mount to the flexible block.Lower the hydraulic jack, as necessary.2. Undo the bolts (2a) and remove the gearbox side support flexible mounting (2b).

Refitting ( Removing

) 1. Place the gearbox side support flexible mounting (1a) in its housing and secure it tightening the bolts (1b) to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
1b	Bolt	GEARBOX SIDE RUBBER MOUNT	M8	(Bodyshell side) 3.2 - 3.9

Using the hydraulic jack, place the gearbox side rigid support in contact with the flexible mounting.2. Tighten the bolt securing the power unit gearbox side rigid support to the flexible mounting to the recommended torque.

	Fastening	Component	Ø	Value(daNm)
2	Bolt	POWER UNIT GEAR BOX END RIGID MOUNT	M12	(Flexible mounting side) 7.9 - 9.7

Remove the hydraulic jack from beneath the gearboxProceed with the refitting Op. 7055B65 ENGINGE BAY DUSTGUARD PROTECTION IN LEFT FRONT WHEEL ARCH R RProceed with the refitting Op. 4450B02 LEFT FRONT WHEEL R RRemove the vehicle from the lift.