125000451 - A05 ALARM LED NOT WORKING

When the alarm is operated, the LED does not come on

		Results of the tests
1	CHECK WITH DIAGNOSTIC EQUIPMENT	All OK	Problems met	Operation
	Connect the diagnostic equipment (Examiner Plus or Smart) and check that there are no faults in the system	End of diagnosis	Faults present	Continue to Step 2
2	ACTIVE DIAGNOSIS WITH DIAGNOSTIC EQUIPMENT	All OK	Problems met	Operation
	Using the diagnostic equipment, carry out the active diagnosis of the LED	Continue to Step 4	LED does not come on	Continue to Step 3
3	WIRING CHECK	All OK	Problems met	Operation
	Check the continuity and insulation of the wiring between the Body Computer and the panelCheck that the supply for the LED leaves the Body Computer and that the LED lights up See    See E7015 ALARM	Continue to Step 4	The supply does not leave the Body Computer for the LED	Replace the Body Computer Op.    Op. 5505A32 BODY COMPUTER - R R
			The supply is sent correctly from the Body Computer but the LED does not come on	Replace the LED in the panel Op.    Op. 5505A24 W/L AND SERVICE SWITCH MOUNT - R+R
4	Continue as instructed by the tester	All OK	Problems met	Operation
	Check that the fault is no longer present	End of diagnosis	.