| | Results of the tests |
| 1 | CHECK WITH DIAGNOSTIC EQUIPMENT | All OK | Problems met | Operation |
|---|
|  | Volumetric surveillance can be excluded voluntarily from the operation of the system See See E7015 ALARM. |
Connect the diagnostic equipment (Examiner Plus or Smart) to the diagnostic socket and check whether there are faults in the CAN network | Continue to Step 2 | Faults present in the CAN network | Repair the connections on the nodes concerned |
| 2 | CHECK ON VOLUMETRIC SENSORS | All OK | Problems met | Operation |
|---|
| Check, in order: - Operation of volumetric sensors;
- Connections between sensors and Body Computer See See E7015 ALARM
| Continue to Step 3 | Sensor faulty | Replace sensors Op. 5580E50 |
| Connections broken | Restore the connections See See E7015 ALARM |
| 3 | CHECK ON CORRECT OPERATION | All OK | Problems met | Operation |
|---|
| Check that the fault is no longer present | End of diagnosis | . | |