125000504 - D74 CRUISE CONTROL SYSTEM DOES NOT GO OFF WHEN BRAKE PEDAL PRESSED

		Results of the tests
1	CHECK ON BRAKE PEDAL SWITCH	All OK	Problems met	Operation
1.9 JTD 16V2.0 JTS	Check that the brake pedal switch is working properly	Continue to Step 2	Brake pedal switch connection faulty	Restore the engine connections See    See E5060 CRUISE CONTROL
			Brake pedal switch faulty	Replace the brake pedal switch Op. 5580A36
3.2 V6	Check that the brake pedal switch is working properly	Continue to Step 2	Brake pedal switch connection faulty	Restore the engine connections See    See E5060 CRUISE CONTROL
			Brake pedal switch faulty	Replace the brake pedal switch Op. 5550D10
2	CHECK CONNECTIONS TO ENGINE MANAGEMENT CONTROL UNIT	All OK	Problems met	Operation
	With the ignition on and brake pedal pressed, check that there is a voltage signal from the brake pedal to the engine management control unit See    See E5060 CRUISE CONTROL	Continue to Step 3	No voltage found	Restore the engine connections See    See E5060 CRUISE CONTROL
3	CHECK ON CORRECT OPERATION	All OK	Problems met	Operation
1.9 JTD 16V	Check that the fault is no longer present	End of diagnosis	Fault persists: control unit defective	Replace the engine management control unit Op.    Op. 1060G80 DS ELECTRIC INJECTION CONTROL UNIT - R R
2.0 JTS3.2 V6	Check that the fault is no longer present	End of diagnosis	Fault persists: control unit defective	Replace the engine management control unit Op. 1056B82