D35 LOW ENGINE OIL PRESSURE - Alfa - GT - eLearn

The warning light indicates a decrease in pressure in the engine lubrication circuit.

0	PRELIMINARY CHECKS	All OK	Problems met	Operation
		Results of the tests
	Check that the engine oil level is correctCheck the condition of the oil sump and ensure there are no external macroscopic leaks	Continue to Step 1	Oil level low	Top up the engine oil level
1	CHECKING OIL PRESSURE SENDING UNIT SENSOR	All OK	Problems met	Operation
	Check the sending unit and wiring are working properly	Continue to Step 2	Sending unit faulty	Replace sender unit
	Check the sending unit and wiring are working properly	Continue to Step 2	Wiring short circuited	Arrange wiring
2	CHECK LUBRICATION SYSTEM PRESSURE	All OK	Problems met	Operation
	Check the pressure of the lubrication system Op. Op. 0510C20 LUBRICATION SYSTEM - CHECK DELIVERY PRESSURE	Continue to Step 3	Pressure low	With the oil sump removed, check the pressuer limiter valve. If OK, check the oil pump. If the pump is also OK, carry on toContinue to Step 3
3	CHECK ON LUBRICATION SYSTEM	All OK	Problems met	Operation
	Check: seal of crankshaft channel plugs main bearing/connecting rod bearing clearance	Continue to Step 4	Caps faulty	Replace the plugs
		Continue to Step 4	Excessive clearance	Replace the bearings
4	CORRECT OPERATION CHECK	All OK	Problems met	Operation
	Check that the fault is no longer present		Fault persists	Search for the fault starting from another symptom''