125000553 - I64 ONE HEADLAMP REMAINS IMMOBILE IN ANY POSITION

One headlamp is not moving in any position, the other one is working properly. Warning: Presence of high voltage (25 kV) at the gas discharge bulb connector during the first 0.7 secs after the dipped headlamps have been turned on. Do not switch on the dipped headlamps when the discharge bulb connector is not correctly connected. Do not disconnect the discharge bulb connector with the dipped headlamps switched on. Handle the discharge bulb with clean, cloth gloves and never touch the glass bulb with your fingers. Do not reverse the polarity of the lamp supply lines or else the control unit will be irreversably damaged.

		Results of the tests
1	HEADLAMP ALIGNMENT CORRECTOR SUPPLY CHECK	All OK	Problems met	Operation
	Check that the headlamp alignment corrector supply is correct See Test    See Test 5540I HEADLAMP ALIGNMENT CORRECTION SUPPLY CHECK	Continue to Step 2	Corrector supply lead broken	Restore the correct connection See    See E3080 HEADLAMP AGLINMENT CORRECTOR
			Corrector damaged	Replace the headlamp alignment corrector Op.    Op. 5540B43 CONTROL UNIT OF ONE RIGHT GAS DISCHARGE LIGHT CLUSTER ONE LH OR RH RR WITH LIGHT CLUSTER REMOVED
2	CHECK ON CORRECT OPERATION	All OK	Problems met	Operation
	Check that the fault is no longer present	End of diagnosis	Dimmer not working	Replace the Body Computer Op.    Op. 5505A32 BODY COMPUTER - R R