125000561 - J03 SCREEN WASHER NOT WORKING

When the lever on the right of the steering wheel is pulled towards the latter, the windscreen washer function does not work properly
Results of the tests
0PRELIMINARY CHECKSAll OKProblems metOperation
Carry out a preliminary check on the fluid level in the reservoir; also make sure that it is not leaking.Check that when the lever on the right of the steering wheel is operated, the windscreen wipers work properly.Check that the jets are not obstructed by ice or dirtContinue to Step 1Mixture level too lowTop up the level Op.    Op. 5050A14 RESERVOIR PLUG (IN ENGINE BAY) OR WINDSCREEN WASHER FLUID LEVEL SENSOR - CHECK AND TOP UP IF NECESSARY
Reservoir damagedReplace the reservoir Op.    Op. 5050A10 WINDSCREEN WASHER FLUID RESERVOIR (IN ENGINE BAY) - R+R
Jets dirty or blockedClean the jets Op.    Op. 5050B10 FRONT WINDSCREEN WASHER JETS - R+R CLEAN AND/OR POSITION
The windscreen wipers are not working eitherContinue according to the instructions inSee table    See table J01 WINDSCREEN/REARSCREEN WASHERS NOT WORKING
1ELECTRIC WINDSCREEN WASHER PUMP SUPPLY CHECKAll OKProblems metOperation
Check the connection between the steering column switch unit, Body Computer and electric windscreen washer pump See    See E3020 WINDSCREEN WASH/WIPEContinue to Step 2Connection brokenRestore the connections See    See E3020 WINDSCREEN WASH/WIPE
2CHECK WITH DIAGNOSTIC EQUIPMENTAll OKProblems metOperation
Connect the diagnostic equipment (Examiner Plus or Smart) to the diagnostic socket and check that there are no faults in the Body ComputerContinue to Step 3Body Computer faultyContinue according to the instructions for the diagnostic equipment
3ELECTRIC WINDSCREEN WASHER PUMP CHECKAll OKProblems metOperation
Check the operation of the electric windscreen washer pumpContinue to Step 4Electric pump faultyReplace the electric windscreen washer pump Op.    Op. 5050B22 FRONT AND REAR SCREEN WASHER PUMP - R+R
4CHECK ON STEERING COLUMN SWITCH UNITAll OKProblems metOperation
Check that the steering column switch unit is working properlyContinue to Step 5Steering column switch unit not workingReplace the steering column switch unit Op.    Op. 5550A12 COMPLETE STALK UNIT - R+R FOR VERSIONS WITH AIR BAG
5CHECK ON CORRECT OPERATIONAll OKProblems metOperation
Check that the fault is no longer presentEnd of diagnosisThe fault persistsReplace the Body Computer Op.    Op. 5505A32 BODY COMPUTER - R R