K10 DOORS OPEN CHECK NOT WORKING - Alfa - GT - eLearn

125000574 - K10 DOORS OPEN CHECK NOT WORKING

When a door is opened, this is not displayed by the relevant instrument panel warning light/icon. When the doors are opened, the interior lights operate correctly.

1	CHECKING WITH DIAGNOSTIC EQUIPMENT	All OK	Problems met	Operation
		Results of the tests
	Connect an Examiner to the diagnostic socket Verify: that there are no faults in the Body Computer;	Continue to Step 2	There are faults in the Body Computer	Proceed in accordance with the instructions provided by the instrument
2	CHECK USING DIAGNOSTIC EQUIPMENT	All OK	Problems encountered	Operation
	Keeping the Examiner connected to the diagnostic socket. Check: for faults in the instrument panel	Move on to Step 3	Presence of faults in the instrument panel	Proceed as instructed by the tester
3	CHECK USING DIAGNOSTIC EQUIPMENT	All OK	Problems encountered	Operation
	Keeping the Examiner connected to the diagnostic socket.Check warning light operation in active diagnosis mode	Move on to Step 4	Warning light does not work	Instrument panel/display faulty. Replace instrument panel Op. 5560B11 ANALOGUE CONTROL PANEL - R+R OR REPLACE
4	CHECK ON CORRECT OPERATION	All OK	Problems encountered	Operation
	Check that the fault is no longer present	Move on to Step 5	Fault in Body Computer	Replace body computer Op. 5505A32 BODY COMPUTER - R R
5	CHECK SWITCHES	All OK	Problems encountered	Operation
	Check operation of switches on catches	Move on to Step 6 1	Catch with defective switch	Replace the catch Op. 7005N21
6	CHECK ON CORRECT OPERATION	All OK	Problems encountered	Operation
	Check that the fault is no longer present		Fault in Body Computer	Replace body computer Op. 5505A32 Search for the fault starting from another symptom