K15 CLOCK NOT WORKING - Alfa - GT - eLearn

125000588 - K15 CLOCK NOT WORKING

With the ignition ON, the display does not display the time correctly or at all.

1	INSTRUMENT PANEL FUNCTIONS CHECK	All OK	Problems met	Operation
		Results of the tests
	Check That the display shows the correct time That it is possible to adjust the time That the clock moves forward That the instrument panel light dimmer has not been selected. That the mode button has not been pressed. That there are no failure messages displayed.	Continue to Step 2	The time displayed is not correct	Adjust the time
			The time cannot be adjusted	Continue to Step 2
			The clock is stuck	Replace instrument panel Op. Op. 5560B11 ANALOGUE CONTROL PANEL - R+R OR REPLACE
			The time is not displayed because there are priority messages or adjustments in progress.	Remove the cause of the priority messages
			The display/time cannot be seen properly	Continue to Step 2
2	CHECK WITH DIAGNOSTIC EQUIPMENT	All OK	Problems met	Operation
	Connect the Examiner to the diagnostic socket.Check that there are no faults	Continue to Step 3	There are errors	Continue according to the instructions for the diagnostic equipment
3	CHECK WITH DIAGNOSTIC EQUIPMENT	All OK	Problems met	Operation
	Keeping the Examiner connected to the diagnostic socket, check the operation of the display in active diagnosis.	Continue to Step 4	Defective display	Replace instrument panel Op. Op. 5560B11 ANALOGUE CONTROL PANEL - R+R OR REPLACE
4	ELECTRICAL CIRCUIT CHECK	All OK	Problems met	Operation
	Check: connections between the left control panel and the instrument panel connections between left control panel and earth left control panel earth See See E4010 INSTRUMENT PANEL	Continue to Step 5	Connections defective; earth defective	Restore the correct connections; if necessary, replace the wiring See See E4010 INSTRUMENT PANEL
5	LEFT CONTROL PANEL CHECK	All OK	Problems met	Operation
	Check that the left control panel is working properly See See E4010 INSTRUMENT PANEL	Continue to Step 6	Left control panel defective	Replace the left control panel Op. Op. 5560B56 PANEL WITH MULTIFUNCTION DISPLAY AND HEADLAMP ALIGNMENT SWITCHES BUTTONS R R
6	CHECK ON CORRECT OPERATION	All OK	Problems met	Operation
	Check that the fault is no longer present	End of diagnosis	.