125000591 - K25 ENGINE COOLANT TEMPERATURE GAUGE NOT WORKING
| Results of the tests | ||||
| 1 | CHECK WITH DIAGNOSTIC EQUIPMENT | All OK | Problems met | Operation |
|---|---|---|---|---|
Connect the Examiner Plus or Smart diagnostic equipment to the diagnostic socket and check:
| Continue to Step 2 | For faults on the instrument panel; For faults on the i.e. control unit. | Continue as instructed by the tester | |
| 2 | CHECK WITH DIAGNOSTIC EQUIPMENT | All OK | Problems met | Operation |
| Keeping the Examiner equipment connected to the diagnostic socket, check the operation of the indicator via active diagnosis. | Continue to Step 3 | Indicator not working | Panel defective, replace the instrument panel Op. Op. 5560B11 ANALOGUE CONTROL PANEL - R+R OR REPLACE | |
| 3 | CHECK ON CORRECT OPERATION | All OK | Problems met | Operation |
| 1.9 JTD 16V | Check that the fault is no longer present | End of diagnosis | Fault persists | Replace engine management control unit Op. Op. 1060G80 DS ELECTRIC INJECTION CONTROL UNIT - R R |
| 2.0 JTS | Check that the fault is no longer present | End of diagnosis | Fault persists | Replace engine management control unit Op. 1056F82 |
| 3.2 V6 | Check that the fault is no longer present | End of diagnosis | Fault persists | Replace engine management control unit Op. 1056B82 |