| | Results of the tests |
| 1 | CHECK WITH DIAGNOSTIC EQUIPMENT | All OK | Problems met | Operation |
|---|
| Connect the diagnostic equipment (Examiner Plus or Smart) to the diagnostic socket and check whether there are errors in the engine management control unit or the Body Computer | Continue to Step 2 | Errors detected in the control unit | Continue following the instructions for the diagnostic equipment |
| Errors detected in the Body Computer | Continue following the instructions for the diagnostic equipment |
| 2 | EMERGENCY STARTING | All OK | Problems met | Operation |
|---|
| 1.9 JTD 16V | Carry out the emergency starting manoeuvre, using the accelerator pedal | Continue to Step 3 | The engine does not start | Replace control unit Op. Op. 1060G80 DS ELECTRIC INJECTION CONTROL UNIT - R R |
| 2.0 JTS | Carry out the emergency starting manoeuvre, using the accelerator pedal | Continue to Step 3 | The engine does not start | Replace control unit Op. 1056F82 |
| 3.2 V6 | Carry out the emergency starting manoeuvre, using the accelerator pedal | Continue to Step 3 | The engine does not start | Replace control unit Op. 1056B82 |
| 3 | CHECK ON CORRECT OPERATION | All OK | Problems met | Operation |
|---|
| Check that the fault is no longer present | End of diagnosis | The fault persists: Body Computer defective | Replace the Body Computer Op. Op. 5505A32 BODY COMPUTER - R R |