125000638 - M05 MANUAL FRONT WINDOWS NOT WORKING

If an obstacle is detected between the glass and the upper safety casing whilst the window is closing, it does not stop immediately or change direction.

To ensure that the windows close fully in doors without an upper frame, the electric windows have a system known as short drop. For more information on this subject, see [DF_7005M]

The change of direction if an obstacle is detected lasts for around 300 ms.

		Results of the tests
1	CHECK WITH DIAGNOSTIC EQUIPMENT	All OK	Problems met	Operation
	Connect the diagnostic equipment (Examiner Plus or Smart) to the diagnostic socket and check that there are no errors in the Driver''s Door Node control unit	Continue to Step 2	Presence of errors in the door node	Continue according to the instructions for the diagnostic equipment
2	ELECTRICAL EQUIPMENT CHECK	All OK	Problems met	Operation
	Check the condition of the connection between the electric windows motor and control unit See    See E3050 ELECTRIC FRONT WINDOWS	Continue to Step 3	Connections broken	Restore the connections See    See E3050 ELECTRIC FRONT WINDOWS
3	CHECK ON CORRECT OPERATION	All OK	Problems met	Operation
	Check that the fault is no longer present	End of diagnosis	Fault persists	Replace the electric windows motor Op.    Op. 7005M21 FRONT SIDE DOOR ELECTRICALLY OPERATED WINDOW - R R