N01 CIGAR LIGHTER/CURRENT SOCKET NOT WORKING - Alfa - GT - eLearn

When the cigar lighter is pressed or a consumer connected to the special connection, the cigar lighter / current socket does not work.

The power sockets all have a heat protection device: if devices with high energy absorption are connected, this protection cuts off the supply.

1	CIGAR LIGHTER CHECK	All OK	Problems met	Operation
		Results of the tests
	Check the cigar lighter/current socket: in particular, make sure that the thermal protection device inside the socket has not been affected due to overloading	Continue to Step 2	Thermal protection affected	Replace the cigar lighter/current socket Op. Op. 7065C72 FRONT CIGAR LIGHTER SOCKET/POWER POINT - FASTEN
2	CIGAR LIGHTER ELECTRICAL CIRCUIT CHECK	All OK	Problems met	Operation
	Check, in order: Cigar lighter fuse (in dashboard control unit) Relay (in dashboard control unit) Cigar lighter earth Continuity and insulation of cigar lighter electrical circuit See See E3070 CIGAR LIGHTER / CURRENT SOCKET	Continue to Step 3	Defective component	Replace the component involved (if a fuse is involved, search for the cause of the problem)
		Continue to Step 3	Connections not correct	Restore the connections See See E3070 CIGAR LIGHTER / CURRENT SOCKET
3	CHECK ON CORRECT OPERATION	All OK	Problems met	Operation
	Check that the fault is no longer present	End of diagnosis	.