125000647 - N28 THE FUNCTIONS ARE NOT SELECTED WHEN THE BUTTONS ARE PRESSED
When some of the buttons on the front panel are pressed the corresponding functions do not take place| Results of the tests | ||||
| 1 | CHECK WITH DIAGNOSTIC EQUIPMENT | All OK | Problems met | Operation |
|---|---|---|---|---|
| Connect the Examiner diagnostic equipment to the diagnostic connector and check that there are no errors in the ''reading parameters'' ambient at the Connect Node. | Continue to Step 2 | Presence of faults | Continue following the instructions for the diagnostic equipment | |
| 2 | CHECK WITH DIAGNOSTIC EQUIPMENT | All OK | Problems met | Operation |
With the Examiner in the ''Reading Parameters'' ambient for the Connect Node, check there are no faults and that when the following buttons are pressed and released:
| Continue to Step 3 | The button(s) in question does not work (there are no changes in state) | Replace the Connect module Op. Op. 5580P12 CONNECT PANEL REPLACE | |
| 3 | CHECK ON CORRECT OPERATION | All OK | Problems met | Operation |
| Check that the fault is no longer present | End of diagnosis | Fault persists | Replace the Connect Op. Op. 5580P12 CONNECT PANEL REPLACE | |