125000648 - N35 I.C.S. TELEPHONE DEVICE NOT WORKING
This table does not deal with faults caused by a malfunction of the service provider or the telephone function. | the telephone is incorporated in the Connect node. |
| Results of the tests | ||||
| 0 | PRELIMINARY CHECK | All OK | Problems met | Operation |
|---|---|---|---|---|
| Check that the service provider card (SIM Card) is working properly | Continue to Step 1 | SIM Card not present or incorrectly positioned. | Restore correct operation | |
| 1 | VOICE COMMAND CHECK | All OK | Problems met | Operation |
| Check that the voice recognition is working properly. | Continue to Step 2 | Microphone faulty. | Continue as instructedSee table See table N71 CONNECT DOES NOT RECEIVE VOICE MESSAGES | |
| 2 | CHECK WITH DIAGNOSTIC EQUIPMENT | All OK | Problems met | Operation |
Connect the Examiner diagnostic equipment to the diagnostic connector and check the plausibility of the following parameters at the Connector Node in the parameters reading ambient:
| Continue to Step 3 | Telephone signal not present. | Replace the Connect Op. Op. 5580P12 CONNECT PANEL REPLACE | |
| Signal that TEL button is always pressed/released. | Continue as instructedSee table See table N28 THE FUNCTIONS ARE NOT SELECTED WHEN THE BUTTONS ARE PRESSED | |||
| Signal that phone card is missing. | Replace the Connect module Op. Op. 5580P12 CONNECT PANEL REPLACE | |||
| 3 | ELECTRICAL EQUIPMENT CHECK | All OK | Problems met | Operation |
| Remove the Connect and check that the telephone aerial connector is correctly inserted in its housing | Continue to Step 4 | Connector disconnected from the Connect. | Insert the connector in its housing See See E3570 INTEGRATED RADIO PHONE | |
| 4 | AERIAL CHECK | All OK | Problems met | Operation |
| Check the continuity of the aerial coaxial cable and the actual aerial - check the aerial amplifier power supplySee See E3570 INTEGRATED RADIO PHONE | Continue to Step 5 | Aerial cable faulty | Renew/replace the aerial lead | |
| Amplifier supply leads faulty | Renew/replace the supply lead | |||
| Amplifier and/or aerial faulty | Replace the amplifier and/or aerial Op. Op. 5570T61 MULTI-FUNCTION AERIAL - R R | |||
| 5 | CHECK ON CORRECT OPERATION | All OK | Problems met | Operation |
| Check that the fault is no longer present | End of diagnosis | Fault persists | Replace the aerial support | |