| | Results of the tests |
| 0 | PRELIMINARY CHECK | All OK | Problems met | Operation |
|---|
| Check whether the Connect works when the on switch is operated or the key is turned to the ON position | Continue to Step 5 | It does not work when the key is turned to the ON position and/or the on button is operated | Continue to Step 1 |
| 1 | CHECK ON FUSE | All OK | Problems met | Operation |
|---|
| Check the condition of the supply fuse, controlled by the ignition and/or the direct supply fuse See See E4091 CONNECT | Continue to Step 2 | Fuse broken | Repair short circuits and then replace the fuse See See E4091 CONNECT |
| 2 | ELECTRICAL EQUIPMENT CHECK | All OK | Problems met | Operation |
|---|
| Check the continuity of the wiring between the battery and the fuse See See E4091 CONNECT | Continue to Step 3 | Wiring broken | Renew the wiring See See E4091 CONNECT |
| 3 | ELECTRICAL EQUIPMENT CHECK | All OK | Problems met | Operation |
|---|
| Check the continuity of the wiring between the battery and the connectors fitted on the Connect See See E4091 CONNECT | Continue to Step 4 | Wiring broken | Renew the wiring See See E4091 CONNECT |
| 4 | CHECKING ELECTRICAL EQUIPMENT | All OK | Problems met | Operation |
|---|
| Check the condition of the Connect supply fuse See See E4091 CONNECT | Continue to Step 5 | Fuse broken | Repair short circuits and then replace the fuse See See E4091 CONNECT |
| 5 | CHECK ON CORRECT OPERATION | All OK | Problems met | Operation |
|---|
| Check that the Info Telematic Node is working properly. | End of diagnosis | Fault persists | Replace the Connect module Op. Op. 5580P12 CONNECT PANEL REPLACE |