125000659 - N71 CONNECT DOES NOT RECEIVE VOICE MESSAGES

The voice command function is managed by the telephone module which is incorporated in the Connect, whilst the microphone is located on the outside.

		Results of the tests
0	PRELIMINARY CHECK	All OK	Problems met	Operation
	Check that the Connect settings disable the voice command function.	Continue to Step 1	Settings not correct	Restore the correct values
1	CHECK WITH DIAGNOSTIC EQUIPMENT	All OK	Problems met	Operation
	Connect the Examiner diagnostic equipment to the diagnostic connector and check that there are no faults at the Connect Node in the errors ambient	Continue to Step 2	Presence of faults	Continue according to the instructions for the diagnostic equipment
2	ELECTRICAL EQUIPMENT CHECK	All OK	Problems met	Operation
	Remove the Connect and check the continuity/insulation of the cable connecting the Connect and the microphone in the courtesy light See    See E3570 INTEGRATED RADIO PHONE	Continue to Step 3	Microphone wiring faulty	Renew the electrical connections See    See E3570 INTEGRATED RADIO PHONE
3	MICROPHONE IMPEDANCE CHECK	All OK	Problems met	Operation
	Check the continuity/insulation of the microphone in the courtesy light See    See E3570 INTEGRATED RADIO PHONE	Continue to Step 4	Microphone faulty	Repair and/or replace the microphone Op. 5570T14
4	CHECK ON CORRECT OPERATION	All OK	Problems met	Operation
	Check that the fault is no longer present	End of diagnosis	Fault persists	Replace the Connect Op. 5580P14