125000665 - O20 FRONT SEAT HEATING NOT WORKING

With panel on, seat heat pads do not work.

		Results of the tests
0	PRELIMINARY CHECKS	All OK	Problems met	Operation
	Check whether the heat pads have been deactivated by means of the switches at either side of the seats. Device operation is automatically cut out at a certain temperature by a thermal contact inside the device.	Continue to Step 1	Switch in OFF position	Activate the switch
			Switch in ON position	Continue to Step 1
1	CHECKING HEAT PAD POWER SUPPLY	All OK	Problems met	Operation
	Check the heat pad connectors are properly supplied with power See    See E3075 HEATED SEATS	Continue to Step 2	No supply	Check the condition of the specific facia junction unit fuse, and the continuity of leads from the control unit to the heat pads: See    See E3075 HEATED SEATS
2	CHECKING SWITCH OPERATION	All OK	Problems met	Operation
	Disconnect the switches and check their efficiency using a Tester	Continue to Step 3	Switches not working properly	Replace switches
3	CHECKING HEAT PAD POWER SUPPLY	All OK	Problems met	Operation
	Remove the seat trim and check the heat pads are in good condition	Continue to Step 4	Cushion heat pad damaged	Replace the heat pad Op.    Op. 7045M22 L/H OR R/H FRONT SEAT CUSHION HEAT PAD - R+R FOLLOWING ELECTRICAL WIRING CHECK
			Squab heat pad damaged	Replace the heat pad Op.    Op. 7045M26 L/H OR R/H FRONT SEAT SQUAB HEAT PAD - R+R FOLLOWING ELECTRICAL WIRING CHECK
4	CHECK ON CORRECT OPERATION	All OK	Problems met	Operation
	Check that the fault is no longer present	End of diagnosis	.