125000669 - O33 BELT REWINDING FAILURE
The seat belt does not rewind correctly and/or completely after the buckle is undone| Results of the tests | ||||
| 0 | PRELIMINARY CHECKS | All OK | Problems met | Operation |
|---|---|---|---|---|
| Visually inspect that the belt does not have kinks, loose threads and/or damage which could prevent it from rewinding | Continue to Step 1 | There are kinks in the front belt | Remove the kinks, if necessary replace the belt Op. Op. 7065A12 FRONT SEAT BELT (ONE), LH OR RH, WITH PRETENSIONER ON WHEEL - R R | |
| There are kinks in the side rear belt | Remove the kinks, if necessary replace the belt Op. Op. 7065B10 L/H OR R/H REAR SAFETY BELT (ONE) - R+R | |||
| There are kinks in the centre rear belt | Remove the kinks, if necessary replace the belt Op. Op. 7065B18 CENTRE REAR SEAT BELT - R.R. | |||
| Front belt damaged | Replace the front belt Op. Op. 7065A12 FRONT SEAT BELT (ONE), LH OR RH, WITH PRETENSIONER ON WHEEL - R R | |||
| Side rear belt damaged | Replace the side rear belt Op. Op. 7065B10 L/H OR R/H REAR SAFETY BELT (ONE) - R+R | |||
| Centre rear belt damaged | Replace the centre rear belt Op. Op. 7065B18 CENTRE REAR SEAT BELT - R.R. | |||
| 1 | CORRECT FITTING CHECK | All OK | Problems met | Operation |
| Check that the system is correctly fitted | Continue to Step 2 | Incorrect fitting. | Continue according to the instructions inSee table See table O31 SEAT BELTS LOCKED | |
| 2 | CHECK ON CORRECT OPERATION | All OK | Problems met | Operation |
| Check that the fault is no longer present | End of diagnosis | . | ||