| | Results of the tests |
| 1 | FUSE CHECK | All OK | Problems met | Operation |
|---|
| Check condition of fuses See See E3040 CENTRAL LOCKING | Continue to Step 2 | Fuse broken | Replace the fuse, after having searched for the cause of the problem |
| 2 | CHECK WITH DIAGNOSTIC EQUIPMENT | All OK | Problems met | Operation |
|---|
| Check the opening/closing of the doors through active diagnosis | Continue to Step 6 | The doors do not open/close | Continue to Step 3 |
| 3 | ELECTRICAL CIRCUIT CHECK | All OK | Problems met | Operation |
|---|
| Check the electrical connection between the Body Computer Node and the door locks See See E3040 CENTRAL LOCKING | Continue to Step 4 | Electrical connector in door lock not properly connected | Connect the electrical connector properly to the door lock |
| Connection broken or not insulated | Restore continuity/insulation of the electrical connection See See E3040 CENTRAL LOCKING |
| 4 | CHECKING ELECTRICAL SIGNAL | All OK | Problems met | Operation |
|---|
| Disconnect the electrical connector for the door lock and check for the opening command signal | Continue to Step 5 | Opening command signal absent. | Continue to Step 6 |
| 5 | Continue as instructed by the tester | All OK | Problems met | Operation |
|---|
| Check that the fault is no longer present. | End of diagnosis | The fault persists | Replace the door lock Op. Op. 7005N21 FRONT SIDE DOOR LOCK MOTOR-LOCK ASSEMBLEY-R R |
| 6 | CHECK ON CORRECT OPERATION | All OK | Problems met | Operation |
|---|
| Check that the fault is no longer present. | End of diagnosis | The fault persists | Replace the body computer node Op. Op. 5505A32 BODY COMPUTER - R R |