125000689 - S24 NOISE'' GEARBOX / ROUND BENDS

Whilst driving, there is a cyclical or whistling noise in a specific gear. This noise decreases or disappears on changing gear

		Results of the tests
0	PRELIMINARY CHECKS	All OK	Problems met	Operation
	Whilst driving, steer to the right or the left and check the onset of the noise. Check whether the intensity increases with the steering angle.	Continue to Step 1	Rolling noise which varies with the steering angle both to the left and the right	Replace the wheel hub bearings
			Increasing the steering angle produces a noise similar to croaking which varies according to the wheel speed	Move on to Step 2
1	DIFFERENTIAL CHECK	All OK	Problems met	Operation
	Check the differential: In particular, check the bearings	Continue to Step 2	Bearings damaged	Replace the bearings Op.    Op. 2110D26 DIFFERENTIAL INNER CASE BEARINGS - REPLACE WITH DIFFERENTIAL INNER CASE REMOVED
			Internal gears worn or damaged	Overhaul or replace the differential housing Op.    Op. 2110D10 DIFFERENTIAL INNER CASE - R + R WITH MANUAL GEARBOX REMOVED - INCLUDES GEARBOX DISMANTLE AND REBUILD
2	WHEEL SIDE CONSTANT VELOCITY JOINT CHECK	All OK	Problems met	Operation
	Check the wheel side constant velocity joints	Continue to Step 3	Wheel side joint damaged	Replace the wheel side joint Op.    Op. 2710A20 WHEEL END CONSTANT VELOCITY JOINT (ONE), L/H OR R/H - R + R WITH DRIVE SHAFT REMOVED - INCLUDES BOOT REPLACEMENT
3	CHECK ON CORRECT OPERATION	All OK	Problems met	Operation
	Check that the fault is no longer present	End of diagnosis	.