125000697 - S70 SEAT BELT NOISE
Whilst the seat belt is rewinding/winding there is a noise coming from the reel| Results of the tests | ||||
| 1 | REEL CHECK | All OK | Problems met | Operation |
|---|---|---|---|---|
- Check the condition of the reel and that it is correctly fitted.
| Continue to Step 2 | Incorrect fitting. | Continue according to the instructions inSee table See table O31 SEAT BELTS LOCKED | |
| Angular lock not working | Replace the seat belt Op. Op. 7065A12 FRONT SEAT BELT (ONE), LH OR RH, WITH PRETENSIONER ON WHEEL - R R | |||
| Inertia lock not working | Replace the seat belt Op. Op. 7065A12 FRONT SEAT BELT (ONE), LH OR RH, WITH PRETENSIONER ON WHEEL - R R | |||
| 2 | HEIGHT ADJUSTER CHECK | All OK | Problems met | Operation |
| Carry out a road test on a straight road with an even surface to check that there is no noise coming from the seat belts | Continue to Step 3 | Noise coming from the height adjuster: fitting not correct | Refit correctly Op. Op. 7065A18 HEIGHT ADJUSTER OF ON FRONT SEAT BELT ONE LH OR RH R R | |
| Noise coming from the height adjuster: component faulty | Replace the damaged components Op. Op. 7065A18 HEIGHT ADJUSTER OF ON FRONT SEAT BELT ONE LH OR RH R R | |||
| Noise coming from the buckle: fitting not correct | Loosen the fixing bolts, correctly position the references and tighten to the recommended torque | |||
| Noise coming from the buckle: fixing not correct | Restore the correct fixing If necessary, replace the belt Op. Op. 7065A14 ANCHORAGE ROD FOR , (ONE), FRONT SEAT BELT LEFT OR RIGHT - R.R. | |||
| Noise coming from the buckle: component faulty | Replace the damaged components Op. Op. 7065A14 ANCHORAGE ROD FOR , (ONE), FRONT SEAT BELT LEFT OR RIGHT - R.R. | |||
| Noise coming from the buckle: foreign bodies inside the button | Remove foreign bodies | |||
| 3 | CHECK ON CORRECT OPERATION | All OK | Problems met | Operation |
| Check that the fault is no longer present | End of diagnosis | . | ||