125000846 - 0010T67 HYDRAULIC CLUTCH SYSTEM BLEED AIR

• Connect the tool to the brake/clutch fluid reservoir.

	Description	Code
1	Brake - clutch bleed equipment	1.806.097.001

• Open the protective cover.

2. Connect the recovery device (pipe and reservoir) to the clutch hydraulic actuator fitting.3. Raise the retaining clip (3a) until the first click is heard and remove pipe (3b) by a sufficient amount to uncover the bleed hole.4. Open the fluid reservoir tap slowly.

• Wait for all the air in the hydraulic system to escape.
• Fit the pipe fully home in its seat on the hydraulic clutch actuator and secure with the retaining clip.
• Close the protective cover.

• Remove the recovery device.
• Remove the bleed equipment.

	Description	Code
-	Brake - clutch bleed equipment	1.806.097.001

• Check that the cluch disengages and that the gears engage properly.
• Check the fluid level in the brake - clutch reservoir is correct.